manualshive.com logo in svg

Danfoss AK-SM 850, Руководство пользователя, Страница: 14 / 74

Поделиться
Скачать
Danfoss AK-SM 850 Скачать руководство пользователя страница 14

The following section describes the current Web Wizards, used 

for simplifying initial settings and Refrigeration layout.  The Web 

Wizards can be used in an offline or online configuration.  

Danfoss recommends using the AK-SM web environment for 

commission tasks.

Establish a web connection to your AK-SM (if working online, 

enter the valid IP address of the AK-SM and apply the factory user 

name and password).  Navigate to the 

Configuration

 menu

Preferences Wizard 

(Language, store names, units, preferences, 

time, date, daylight savings)

1/ To easily configure your units preferences, launch the Prefer-

ences wizard.  Use the Wizard navigation controls to move 

thought the Wizard screens.  

2/ To make changes, double click on the relevant line and 

continue until the final screen.

3/ Press the finish button to complete and close the wizard 

(return to main wizard screen)

Users Wizard

 (Create, modify users, user groups, authorization 

levels)

1/  Enter number of users required (max 22), set password and 

browser language for each user

2/ Enter the number of authorization types (max 7), against the 

settings line double click to modify the scope of system access

3/ Press the Finish button to complete the Web Wizard

Licensing Wizard 

(Enter new license functionality)

Not currently used

Refrigeration layout Wizard 

(used to define your refrigeration 

layout, grouping case with packs, forming associations)

One of the main features of the refrigeration layout wizard allows 

the user to make use of a network scan.  The principle is that the 

wizard is initially used to initiate a network scan, discover and list 

what is found.  This discovery is then used to easily define the 

Pack and Case controller relationships (suction groups).  The 

wizard allows for easy drag and drop association, the net result is 

that once completed the refrigeration layout is built in the AK-SM.  

The Refrigeration layout Wizard can be used during a live connec-

tion to your AK-SM or can be used when programming offline.

limitations:  Whilst the wizard will layout the Pack and Case 

relationships, further controller configuration may be required.  

Refer to section 

6

under ‘ Configuration’ for guidance on 

any remaining configuration areas required.  Currently the wizard 

is intended for  Pack and Case devices, any controls not desig-

nated as such will have to be configured using traditional config 

methods (see Configuration section).

Initial Configuration - Wizard

Web Wizard Navigation        

Back          Close                            Progress   Forward

14 

User Guide 

Lit. no. 

USCO.PI.R1.E1.02 © Danfoss 07-2013 

AK-SM 

850

Содержание AK-SM 850











































































Отзывы:

Нет отзывов