Danfoss AHF 010, Руководство по конструкции

Страница: 30 / 124

Selection table, 380–415 V, 50 Hz
Drive values AHF values
Power rating
[kW]
1)
Input
current
380–440 V
[A]
Current
rating
[A]
Order numbers 3) Enclosure type
AHF 005 IP20 AHF 010 IP20 AHF 005 IP20 AHF 010 IP20
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
1.2
1.6
2.2
2.7
3.7
5.0
6.5
9.0
10 130B1229 130B1027 X1-V3 IP20 if X1-V3 IP20 if
5.5
7.5 11.7
14.4
14 130B1231 130B1058 X1-V3 IP20 ef X1-V3 IP20 ef
11 22 22 130B1232 130B1059 X2-V3 IP20 ef X2-V3 IP20 if
15 29 29 130B1233 130B1089 X2-V3 IP20 ef X2-V3 IP20 if
18.5 34 34 130B1238 130B1094 X3-V3 IP20 if X3-V3 IP20 if
22 40 40 130B1239 130B1111 X3-V3 IP20 if X3-V3 IP20 if
30 55 55 130B1240 130B1176 X3-V3 IP20 if X3-V3 IP20 if
37 66 66 130B1241 130B1180 X4-V3 IP20 if X4-V3 IP20 if
45 82 82 130B1247 130B1201 X4-V3 IP20 ef X4-V3 IP20 ef
55 96 96 130B1248 130B1204 X5-V3 IP20 ef X5-V3 IP20 ef
75 133 133 130B1249 130B1207 X5-V3 IP20 ef X5-V3 IP20 ef
90 171 171 130B1250 130B1213 X6-V3 IP20 ef X6-V3 IP20 if
110 204 204 130B1251 130B1214 X6-V3 IP20 ef X6-V3 IP20 if
132 251 251 130B1258 130B1215 X7-V3 IP20 if X7-V3 IP20 if
160 304 304 130B1259 130B1216 X7-V3 IP20 if X7-V3 IP20 if
– – 325
130B3152
4)
130B3136
4) X8-V3 IP20 if X7-V3 IP20 if
200 381 381 130B1260 130B1217 X8-V3 IP20 ef X7-V3 IP20 if
250 463 480 130B1261 130B1228 X8-V3 IP20 ef X8-V3 IP20 ef
315 590 608 2 x 130B1259 2 x 130B1216
See individual filters
355 647 650 2 x 130B3152 2 x 130B3136
400 684 685
13
130B1260
13
130B1217
450 779 762 2 x 130B1260 2 x 130B1217
500 857 861
13
130B1261
13
130B1228
560 964 960 2 x 130B1261 2 x 130B1228
630 1090 1140 3 x 130B1260 3 x 130B1217
710 1227 1240
2 x 13
130B1261
2 x 13
130B1228
800 1422 1440 3 x 130B1261 3 x 130B1228
1000 1675 1720
2 x 13
2 x 130B1261
2 x 13
2 x 130B1228
Table 5.3 Frequency Converters with Voltage Classes T4 and T5, Operating at 380–415 V, 50 Hz
1) The power ratings in the selection table are the actual operating power and not necessarily the type code power rating.
Changing operating conditions between HO and NO changes the actual operating conditions and the filter selection must reflect the actual
operating conditions.
2) Typical hp shaft output at 460 V.
3) The fan control system allows extended input voltage range as 200–415 V. The AHFs for 380–415 V/50 Hz mains operation can be operated
with 200–240 V mains supply.
4) Filters are used as paralleling for 355 kW drive.
Selection of Advanced Harmo...
VLT
®
Advanced Harmonic Filter AHF 005/AHF 010
28 Danfoss A/S © 05/2019 All rights reserved. MG80C602
5 5