Danfoss AHF 010, Руководство по конструкции

Страница: 31 / 124

Selection table, 380–415 V, 60 Hz
Drive values AHF values
Power rating
[kW]
1)
Input
current
380–440 V
[A]
Current
rating
[A]
Order numbers 3) Enclosure type
AHF 005 IP20 AHF 010 IP20 AHF 005 IP20 AHF 010 IP20
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
1.2
1.6
2.2
2.7
3.7
5.0
6.5
9.0
10 130B2857 130B2262 X1-V3 IP20 if X1-V3 IP20 if
5.5
7.5 11.7
14.4
14 130B2858 130B2265 X1-V3 IP20 ef X1-V3 IP20 ef
11 22 22 130B2859 130B2268 X2-V3 IP20 ef X2-V3 IP20 if
15 29 29 130B2860 130B2294 X2-V3 IP20 ef X2-V3 IP20 if
18.5 34 34 130B2861 130B2297 X3-V3 IP20 if X3-V3 IP20 if
22 40 40 130B2862 130B2303 X3-V3 IP20 if X3-V3 IP20 if
30 55 55 130B2863 130B2445 X3-V3 IP20 if X3-V3 IP20 if
37 66 66 130B2864 130B2459 X4-V3 IP20 if X4-V3 IP20 if
45 82 82 130B2865 130B2488 X4-V3 IP20 ef X4-V3 IP20 ef
55 96 96 130B2866 130B2489 X5-V3 IP20 ef X5-V3 IP20 ef
75 133 133 130B2867 130B2498 X5-V3 IP20 ef X5-V3 IP20 ef
90 171 171 130B2868 130B2499 X6-V3 IP20 ef X6-V3 IP20 if
110 204 204 130B2869 130B2500 X6-V3 IP20 ef X6-V3 IP20 if
132 251 251 130B2870 130B2700 X7-V3 IP20 if X7-V3 IP20 if
160 304 304 130B2871 130B2819 X8-V3 IP20 if X7-V3 IP20 if
– – 325
130B3156
4)
130B3154
4) X8-V3 IP20 ef X7-V3 IP20 ef
200 381 381 130B2872 130B2855 X8-V3 IP20 ef X7-V3 IP20 ef
250 463 480 130B2873 130B2856 X8-V3 IP20 ef X8-V3 IP20 ef
315 590 608 2 x 130B2871 2 x 130B2819
See individual filters
355 647 650 2 x 130B3156 2 x 130B3154
400 684 685
13
130B2872
13
130B2855
450 779 762 2 x 130B2872 2 x 130B2855
500 857 861
13
130B2873
13
130B2856
560 964 960 2 x 130B2873 2 x 130B2856
630 1090 1140 3 x 130B2872 3 x 130B2855
710 1227 1240
2 x 13
130B2873
2 x 13
130B2856
800 1422 1440 3 x 130B2873 3 x 130B2856
1000 1675 1720
2 x 13
2 x 130B2873
2 x 13
2 x 130B2856
Table 5.4 Frequency Converters with Voltage Classes T4 and T5, Operating at 380–415 V, 60 Hz
1) The power ratings in selection table are the actual operating power and not necessarily the type code power rating.
Changing operating conditions between HO and NO changes the actual operating conditions and the filter selection must reflect actual operating
conditions.
2) Typical hp shaft output at 460 V.
3) The fan control system allows extended input voltage range as 200–415 V. The AHFs for 380–415 V/60 Hz mains operation can be operated
with 200–240 V mains supply.
4) Filters are used as paralleling for 355 kW drive.
Selection of Advanced Harmo... Design Guide
MG80C602 Danfoss A/S © 05/2019 All rights reserved. 29
5 5