Removing the Terminal Cover
The lower cover panel and terminal cover at the bottom part of the drive are required to maintain the IP20/Chassis protection
rating. Remove the lower cover panel and terminal cover before installing the cable clamp kit. Refer to
Illustration 1.1
.
1.
Unfasten 4 screws (T25) and remove the lower cover panel from the drive.
2.
Unfasten 5 screws (T20) securing the terminal cover and remove the cover.
1
Lower cover panel
5
Slotted drive bracket
2
Terminal cover
6
Plastic gland plate
3
Grommet access hole for control wiring
7
Fastener point
4
Track guide
8
Keyhole opening
Illustration 1.1 Terminal Cover Disassembly/Assembly
Installation Instructions
Cable Clamp Kit for E3h/E4h Drives
VLT
®
FC Series FC 102, FC 103, FC 202, and FC 302
2
Danfoss A/S © 04/2018 All rights reserved.
MI35U102