4.
5.
6.
7.
8.
Lift the the frequency converter and lean it forward slightly, aligning the 2 holes in the lower edge over the 2 lower M10
bolts.
e30bk627.10
Illustration 9: Drive Slot Gasket Installation
Loosely fasten the bolts with 2 M10 nuts.
Position the top spacer from the kit behind the mounting flange at the upper edge of the frequency converter.
e30bk626.10
Illustration 10: Top Spacer Installation
Slowly push the top of the frequency converter back against the mounting surface until the mounting holes line up with
the upper 2 M10 bolts.
Secure the top of the frequency converter using 2 M10 bolts.
Torque all fasteners to 19 Nm (170 in-lb).
AN371942578354en-000101 / 136R0290 | 11
Danfoss A/S © 2023.09
Installation
In-back/Out-back Cooling Kit for FK09c/FB09c and FK10c/FB10c
Installation Guide
