background image

AN371942578354en-000101 / 136R0290

18| Danfoss A/S © 2023.09

Installation

In-back/Out-back Cooling Kit for FK09c/FB09c and FK10c/FB10c

Installation Guide

Danfoss A/S

Ulsnaes 1

DK-6300 Graasten

drives.danfoss.com

Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other tech-

nical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be

considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility

for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products or-

dered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of

Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.

*136R0290*

*M00312

01

*

Содержание 176F4190



















Отзывы: