Danfoss 176F4190, Руководство по установке

Страница: 6 / 18

1.
2.
3.
4.
5.
2.4 Installing the Base Plate
Use the following steps to install the base plate. See Illustration 4 .
Procedure
Unfasten 9 M5x12 screws (T25) from the cable access plate (gland plate), and remove the plate from the bottom of the
frequency converter.
Keep the cable access plate and screws for reinstallation.
Adhere the base plate gasket to the underside of the base plate.
Fasten the bottom bracket to the upper side of the base plate using 2 M5x12 screws (T25) from the kit.
Position the base plate at the bottom of the frequency converter.
Secure the base plate using 6 M5x12 screws (T25) from the kit.
e30bk579.10
Illustration 4: Installation of Bottom Bracket and Base Plate
AN371942578354en-000101 / 136R0290 6 | Danfoss A/S © 2023.09
Installation
In-back/Out-back Cooling Kit for FK09c/FB09c and FK10c/FB10c
Installation Guide