Dane Technologies, Inc.
QuicKART
Owners Manual
38
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
970-047
REV
B 2-9-09
D= Daily, M= Monthly, S-A = Semi-annually, Y=Yearly >>>
D
M
S-A
Y
Inspect throttle, turn keyswitch to “Manual”. The cart should not move.
Check that the RH thumb wheel throttle moves freely in a CW then
CCW direction (nudge switch on M3 E). The cart should move forward
then reverse.
X
Test the parking brake system. With the keyswitch “Off”, try to move the
machine. The brake should keep the drive wheels from rotating.
X
Test the Emergency shut-off button. With the keyswitch in “Manual” or
“Radio”, pressing the Emergency shut-off will disable all controls and
stop the machine.
X
Strobe Light: Check for damage and proper operation.
X
Remote: Check for damage. With the keyswitch in “Radio”, check
operation with all buttons. The remote should operate up to 100’ from
the machine.
X
Charge batteries overnight, every night.
X
Check couplers and yokes for unsafe wear, loose or missing fasteners,
and safe connection.
X
Batteries: Inspect loose connections, frayed insulation, and corrosion.
Clean away corrosion. Check charger operation, see page 36.
X
Wiring: Inspect all wiring and electrical connections for loose
connections, frayed or deteriorated insulation, exposed wire, and
broken or missing hardware.
X
Maintenance Type Batteries: Check water levels, add
distilled water
after charging as necessary.
X
Check body for damage. Check all bolts, fasteners and connections for
tightness and wear.
X
Check tires and caster wheel for wear, bent rims and missing or loose
lug nuts.
X
Check the antenna for damage.
X
Check the machine for damaged or missing labels.
X
Apply grease to rear swivel wheel using a standard grease gun, two
places.
X
Check the AC charger cord for frayed or deteriorated insulation and
exposed wire.
X
Have your authorized service center check your QuicKART completely.
X
