AIRMATE-USB manual page: 18
PHONES:
Preferable 400 Ohms or higher!
11.
TECHNICAL SPECIFICATIONS
INPUTS
Mic input balanced 2 kOhm. Plus 48volt phantom
Mic noise -122 dBr (A-weighted).
Sensitivity: -70dB min, 0dB maximum.
Line inputs: unbalanced, 10kOhm, Cinch gain range 40dB.
Phono inputs: unbalanced, 47kOhm, 1-10 mV.
2 Track return: -10dBv at 10kOhm.
Aux return: -10dBv at 10kOhm.
HYBRID
Output
: Internally connected in the Airmate.
Input
: Line level 0 dBu balanced, internally connected in the Airmate.
R/C balance
: fully adjustable
Separation
: more than 30dB. (dependent upon adjustments of RC balance)
OUTPUTS
Left/Right/Monitor/Aux: +4dBu (1.55volt) at 47 Ohm.
Tape output: -10dBv at 1kOhm.
Headphone:
400-600
Ohm,
500mW.
EQUALIZER
High: +/- 12 dB at 12kHz shelving curve.
Mid: +/- 12 dB at 1 kHz bell curve.
Low: +/- 12 dB at 60 Hz bell curve.
RED LIGHT
Stereo jack connector to intern relay
Center
Contact
=
Tip
Normally
Closed
=
Shield
Normally Open = Ring
OVERALL
Frequency response 10-60.000 Hz (+/- 0.5dB).
Distortion: <0.009% max at 1 kHz.
Dimensions: 483x356x95 mm ( 8HE ) .
Weight: 11 kg.
We wish a you creative and long lasting use of this quality
product of
D&R Electronica Weesp b.v.
Rijnkade 15B
1382 GS WEESP, The Netherlands
Phone:
0294-418 014
Fax:
0294-416 987
Website:
http://www.d-r.nl
E-mail:
