AIRMATE-USB manual page: 14
2-TRACK INPUTS
These inputs are intended to return stereo machines in the monitor section.
Such as signals from master recorder/tuners etc. The level needs to be -10dBv (300mV) as a minimum for
optimum signal to noise.
MASTER OUTPUTS
The master outputs are on male 3 pin XLR connectors in a ground compensated arrangement. Ground
compensated means that all advantages of balancing are maintained when connected to a balanced input of
a power amp, professional recorder or On-Air processor. The output level is +4dBu (1.22 volt).
GROUND CONNECTOR
This terminal is intended for grounding Phono players or it is to be used as central ground pin in complex
set-ups.
MAINS CONNECTOR
The mains inlet is a euro type connector with built in fuse. Your AIRMATE-USB can accept voltages between
210 volts and 230 volts 50/60Hz.
The built in fuse is a slow blow type of 1 Amp. never replace this fuse by higher values.
In case of 115 volt local power the value of the fuse needs to be increased to 2 Amps and your local dealer
has to rewire the internal transformer wires.
