AIRMATE-USB manual page: 10
SPECIAL AVAILABLE OPTIONS IN YOUR AIRMATE-TELCO MODULE
On the input PCB of your AIRMATE-USB MODULE there are several jumpers that can be changed to enable
different configurations of the channel settings.
We advise to have this done by your local dealer if the need arises.
The following 4 jumper settings can be changed to adjust the Airmate-USB Telco modules to your needs.
1
J6/16
Stereo Aux send pre or post selectable via Jumper J6/16 (post is default).
2
J7
Clean-Feed (CLN-FEED) jumper (J7) to select whether the audio stereo signal
(summed to mono) is send to the clean-feed bus that is available in the master section
for external Hybrids.
3
J17
Pulse/continuous Jumper J17 to change the start pulse from latching (continuously) to
pulse.
CONNECTION WIRING OF BOTH (Wall) LINE and PHONE RJ-11 CONNECTORS
PHONE/WALL RJ-11
FUNCTION
CONNECTION
Pin 1
n.c.
Pin 2
A (telephone line)
In/out
Pin 3
B (telephone line)
In/out
Pin 4
n.c.
