manualshive.com logo in svg

d&b audiotechnik 10D, Руководство пользователя, Страница: 54 / 92

Поделиться
Скачать
d&b audiotechnik 10D Скачать руководство пользователя страница 54

 

12.5.3. Levels

Selecting «Levels» opens the corresponding subscreen.

The data area of the levels screen provides the following

information (starting at the top left):

1st line

  Mute status of each channel.

2nd line

  Loudspeaker setups selected for the individual

channels.

Input

  Actual input signal levels of the individual

channels.

Output

  Actual output voltages of the individual

amplifier channels.

Gainred/

Headr

  Relationship between headroom (Headr) and

gain reduction (Gainred) with peak hold for

1 sec.

Display ranges:
Gainred

0 dB 

Þ

 +32 dB.

Headr

–32 dB 

Þ

 0 dB.

Impedance   Actual load impedance values for the

individual amplifier channels.

Power

  Power actually delivered by the individual

amplifier channels.

Temperature   Actual temperatures of each pair of amplifier

channels.

ISP/OSP

  Indicates whether the input signal (ISP) as well

as the amplifier output signal (OSP) of the

individual channel are present.

GR/OVL

  Indicates whether gain reduction (GR) of the

respective channel is active or the respective

channel is overloaded (OVL).

Mains/SMPS   Displays the actual mains voltage and

frequency and a power limiter LED is provided.

 

d&b 10D/30D Manual 1.10 en

54

Содержание 10D





























































































Отзывы:

Нет отзывов