d&b audiotechnik 10D Скачать руководство пользователя страница 47

Страница: 47 / 92

12.3.1. Output mode

NOTICE!

Ensure that the connected loudspeaker type corresponds to the

actual output configuration of the 10D/30D.

Dual Channel mode (A/B, C/D)
The Dual Channel mode is dedicated to d&b fullrange systems

(passive systems) and actively driven d&b subwoofers. Both

channels of each pair of amplifier channels can be configured for

TOP or SUB cabinets independently.

In Dual Channel mode each pair of amplifier output channels

(AMP A/B, AMP C/D) acts as a two channel amplifier (stereo

amplifier). The amplifier channels are connected to their

corresponding output connectors (AMP A to OUT A ...) while the

audio input for each amplifier channel can be assigned via the

input routing.

Pin assignment
SPEAKER OUTPUTS A (B, C, D):
+ = Amp A (B, C, D) pos.
— = Amp A (B, C, D) neg.

Mix TOP/SUB mode (A/B MIX, C/D MIX)
The Mix TOP/SUB mode is dedicated to d&b fullrange systems

(passive systems) and actively driven d&b subwoofers.

TOP cabinets (setups) can be selected on channel A (C) and SUB

cabinets (setups) on channel B (D) while the audio input for each

amplifier channel can be assigned via the input routing.

Pin assignment
SPEAKER OUTPUTS A/B (C/D):
+ = Amp A (C) pos. (TOP)
— = Amp A (C) neg.(TOP)
+ = Amp B (D) pos. (SUB)
— = Amp B (D) neg. (SUB)

2-Way Active mode (30D only)
The 2-Way Active mode is dedicated to d&b active systems.

All settings of channel A (C) and the corresponding input signal

are internally linked to channel B (D).

Pin assignment
SPEAKER OUTPUTS A/B (C/D):
+ = Amp A (C) pos. (LF)
— = Amp A (C) neg.(LF)
+ = Amp B (D) pos. (MF/HF)
— = Amp B (D) neg. (MF/HF)

2 x Dual Channel mode

2 x Mix TOP/SUB mode

2 x 2-Way Active mode (30D only)

d&b 10D/30D Manual 1.10 en

Содержание 10D





























































































Результаты поиска

Содержание 10D

Отзывы:

d&b audiotechnik 10D, Руководство пользователя, Страница: 47 / 92

Результаты поиска

Содержание 10D

Отзывы: