manualshive.com logo in svg

d&b audiotechnik 10D, Руководство пользователя, Страница: 50 / 92

Поделиться
Скачать
d&b audiotechnik 10D Скачать руководство пользователя страница 50

 

 

 

DHCP+LL

IP mode for using Link-Local addressing.

When a DHCP server is present, the IP address

is assigned automatically by that server. If this

fails, an address will be assigned

automatically using the Link-Local address in

the range from 169.254.0.1 to

169.254.255.254. All devices in a local

network will ensure that their IP addresses are

unique. After the Link-Local configuration is

completed, a fully functional network will be

available. If a DHCP server is available later,

an automatic IP will be automatically assigned

later.

Link-Local addressing is the default behavior of

every PC and MAC computer when no DHCP

server is present. The DHCP+LL setting enables

the amplifier to also work in a setup without a

DHCP server. A fully functional local network

including remote control from a PC or Mac via

R1 will be set up automatically.

Set gateway

to default

  When this button is selected, the gateway

address is derived from the IP address and IP

mask settings.

Additional information fields

MAC:

  Displays the fixed MAC address of the device.

Conn.:

  Shows which of the etherCON connectors is

connected (busy).

Status:

  Provides status information on the network.

12.4.2. Remote ID

Selecting the «Remote ID» button allows the setting of the unique

Remote identifier of the respective device in the format [nn].[nn].

Subnet

  The first two digits represent the subnet.

Within an 

Ethernet network up to 100

subnets can be defined (values 0 to 99).

Within a 

CAN network up to eight subnets

can be defined (values 0 to 7).

Note: In case of a Subnet mismatch the

following message is issued at the bottom

of the screen:
Remote ID exceeds 7.63, CAN disabled!

Device ID

  Using the two digit Device ID for each subnet,

you can define a total of 63 devices (values 1

to 63).

 

d&b 10D/30D Manual 1.10 en

50

Содержание 10D





























































































Отзывы:

Нет отзывов