Dancover GH140040, Руководство пользователя

Страница: 2 / 24

Dear customers!
After you had decided to purchase a greenhouse you have received a product produced the utmost care.
Its especially strong frame is made of special galvanized metal profiles of 1 mm thickness.
The greenhouse is easy to assembly due to its simple design.
Many different accessories will allow you to implement your ideas.
We reserve the right to make changes and improvements related to technological progress. Due to that
mismatches between descriptions and illustrations may occur.
We wish you a lot of joy and success upon purchase of our greenhouse.
ATTENTION!
When assembling the frame of the greenhouse and working with a coating made of cellular
polycarbonate always wear safety gloves or protective working measures.
To assembly the greenhouse you will need the following tools:

8mm diameter hexagon wrench or an open-end wrench.

A Phillips screwdriver or a battery-powered screwdriver.

A shovel (to dig holes)

A level (to measure flatness of a pad)

Ropes (to measure a diagonal)

Knife (to cut polycarbonate sheets)
Follow local building regulations, if necessary.
If a strong wind or a storm occurs, close windows or doors.
Before starting to assembly the greenhouse you must read all instructions at least once and familiarize
yourselves with separate sections and profiles. It is your important auxiliary means.
Check supply content according to specifications of parts. IF YOU FIND NONCONFORMITIES WITH
THE SPECIFICATION
– IMMEDIATELY CONTACT THE SELLER AND NOTIFY HIM ABOUT
SHORTAGE OF PARTS.
Then sort out profiles and put them separately.
When assembling the greenhouse it is recommended to tighten bolts manually at first – not tight in order to
be able to easily move profiles, if necessary. Level the assembled frame of the greenhouse by using the level,
and then tighten the bolts tightly.