Dancover GH140040, Руководство пользователя

Страница: 14 / 24

Fig. 17.3 Fig. 17.4
18. The side parts of polycarbonate for the back and the front are fixed analogically. We apply the
polycarbonate sheet (700x1950 mm) evenly with an edge of an opening near the door and the back bars and
evenly with the foundation. The polycarbonate sheet is tightened to the bar connection angles (19; 20) and
the polycarbonate connection plates (21) with M5-20 bolts (28), M5 nuts (30), and gaskets (31). The sheet is
tightened to the bars of the rear part of the greenhouse (No. 8) and the bar fixtures (No. 9, No. 10, and No.
11) with M5-40 bolts (29), M5 nuts (30), and gaskets (31). Then cut polycarbonate near the frame profile
with a sharp knife or a jigsaw, if necessary (Fig. 18.1
– 18.4).
Fig. 18.1 Fig. 18.2