Dancover GH140040, Руководство пользователя

Страница: 18 / 24

The sheets are connected to each other by connecting H-profiles (32), which are tightened to the 3
rd
bar (for
the greenhouse of 2.12 m length) from one and another side of the greenhouse by their flat part with M5-40
bolts (29), M5 nuts (30), and gaskets (31). The holes made in the H-profile must match the holes made in the
frame. If the greenhouse is longer than 2.12 m, the H-profiles are to be tightened to the bars as follows,
starting from the front of the greenhouse:
3.17 m 3
rd
and 5
th
bars
4.12 m 3
rd
, 5
th
, and 7
th
bars
5.17 m 3
rd
, 5
th
, 7
th
, and 9
th
bars, and etc.
ATTENTION ! Remove the protective film from the connecting profiles, if any!
Fig. 21.6 Fig. 21.7
To cover the walls of 4.12 m length TITAN Classic 480 greenhouse 2 sheets of 1050x1485 mm and 2 sheets
of 985x1485 mm are needed. The sheets are inserted into the connecting H-profiles downward from the top.
Polycarbonate edges at the front and at the back must overhang up to the edge of the foundation. The sheets
are tightened to the frame with M5-40 bolts (29), M5 nuts (30), and gaskets (31) (Fig. 21.8
– 21.11).
Fig. 21.8 Fig. 21.9 Fig. 21.10 Fig. 21.11
A plate protection tape or flexible ending U-profiles (34) are applied to the upper end of these sheets. The
bottom ends of the sheets are to be left open (21.12
– 21.13).