Danaher Motion Superior Electric
Section 1: Introduction
SS2000 D3 AND D6
1
SECTION 1: INTRODUCTION
1.1 U
SING
T
HIS
M
ANUAL
It is important that you understand how this SLO-SYN
®
2000 unit is installed
and operated before you attempt to use it. R
ead this manual completely before
proceeding with the installation of this unit.
This manual is an installation and operating guide to the SLO-SYN 2000 Drive.
Section 1 gives an overview of the Drive and its features. Section 2 describes the
steps necessary to place the drive into operation. General wiring guidelines as
well as the physical mounting of the unit and connections to the drive portion
are covered in Section 3.
Complete specifications, listed in Section 4, provide electrical, mechanical and
performance specifications. The procedure for setting the motor current level is
also covered in this section.
Torque versus speed characteristics with all appropriate SLO-SYN Stepper
Motors are given in Section 5. Section 6, System Checking, gives procedures to
follow if the SLO-SYN 2000 drive fails to operate properly.
Appendix A provides procedures for troubleshooting electrical interference
problems.
1.2 P
RODUCT
F
EATURES
SLO-SYN 2000 drives are bipolar, speed adjustable, two-phase chopper drives
which use power MOSFET and IGBT devices. They can be set to operate a
stepper motor in full or half steps or in 1/5, 1/10, 1/16, 1/36, 1/50, 1/100, 1/125
or 1/250 microsteps. The maximum running speed is 10,000 full steps per
second. To reduce the chances of electrical noise problems, the control signals
are optically isolated from the drive circuit.
U.L. Recognized under Component Program, File #E146240
Switch selectable current levels of .05 through 6 amperes depending on unit selected.
Latched short circuit protection (phase-to-phase and phase-to-ground)
Unlatched undervoltage and transient overvoltage protection
Inputs are optically isolated
Boost/Reduce Current and Windings Off capabilities
Drive Ready output
Built-in AC line filter plus MOV
Self-test function
Boost Current
Reduce Current
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
