Dan Dugan Sound Design E-2A, Руководство пользователя

Страница: 39 / 84

Dugan Model E-2A User Guide Dugan Control Panel Software
39
Level Indicator
Each channel has a
level
LED that lights green when the audio level is adequate for
automatic mixing. It should remain green when no one is talking.
• If the level indicator blinks, raise the console’s channel input gain, and/or move
the console’s
+4/-10
switch on the back panel to
-10
.
If the channel input gain is already set to its maximum, raise all the weight controls
an equal amount (e.g., from 0 to +5).
• If the level LED lights red, lower the console’s channel input gain, and/or move
the console’s
+4/-10
switch on the back panel to
+4
so it stays green at all times.
Bypass
When bypass is active, the signal passes through without automixing. A bypassed
channel appears inactive, with all lights extinguished.
Figure 6-4
bypass
button active
Man
and
bypass
modes are similar:
•
bypass
makes an instantaneous transition, which can cause an audible click. It is
a hardware bypass and therefore has no signal latency.
• man performs a quick fade without sonic artifacts. It has the same signal latency
as
auto
mode.
Since analog channels 1–12 are bypassed when powered off, it not necessary to un-
patch the Model E-2A when not in use.
To deactivate bypass , you can:
• Click bypass again;
- OR -
• Click any of the three channel mode buttons.