Dan Dugan Sound Design E-2A, Руководство пользователя

Страница: 55 / 84

Dugan Model E-2A User Guide
55
Chapter 7: Pre-fader Insert
The Dugan Speech System works either pre- or post-fader, but it is more convenient
to operate post-fader. If your console allows a post-fader insert, skip this chapter.
Workaround to Create Post-fader Insert
If your console has post-fader direct outputs and enough extra inputs, you can create
post-fader inserts (see figure below).
Figure 7-1 Workaround using direct outs and extra inputs to create a post-fader insert
Use the Input Faders for mixing and leave the Extra Inputs (returns) at unity gain.
Hide the Extra Input faders if your console has layers.
Pre-fader Insert
If you must use a pre-fader insert, this section describes how to properly mute and
pre-listen to muted channels.
Muting Channels
Mics must be muted by using the mute buttons on the Dugan Control Panel. Pulling
a fader down on the console will not properly mute a pre-fader channel. Although
that mic is no longer audible in the mix, it still contributes to the gain computations
and causes ambient noise fluctuation. In the worst case, this could cut off a speaker.
Mics Input Faders
Direct Outs
Extra Inputs
Mix !
Bus
Line Inputs
Dugan !
Automatic Mixing !
Controller