Dalsa QuickCam, Руководство пользователя

Страница: 58 / 85

QuickCam User's Manual 56
03-032-10187-04 DALSA corp.
Under Pixel Coefficients :
2. Beside FPN Coefficients , check the checkbox to enable coefficients or
uncheck the checkbox to disable coefficients.
3. Click Apply .
4. Beside PRNU Coefficients , check the checkbox to enable coefficients or
uncheck the checkbox to disable coefficients.
5. Click Apply .
6. To save the pixel coefficients to the camera’s non-volatile memory, open the
Save/Restore in the Camera Configuration Window .
Under Pixel Coefficients :
7. Select the pixel coefficient set number from the Set Number drop down box.
You can save or load up to four different sets of pixel coefficients.
8. Click Save .
7.8 Setting Individual Pixel Coefficients
To set an individual pixel’s FPN and PRNU coefficient:
1. Open the Calibration tab in the Camera Configuration Window .
Under Pixel Coefficients :
2. Beside FPN Coefficients , enter the pixel number to set.
3. Enter the FPN coefficients to use in DN in the FPN Coefficient (DN) text
box.
4. Click Apply .
5. Beside PRNU Coefficients , enter the pixel number to set.
6. Enter the PRNU coefficients to use in DN in the PRNU Coefficients (DN)
text box.
7. Click Apply .
8. To save the pixel coefficients to the camera’s non-volatile memory, open the
Save/Restore tab in the Camera Configuration Window .
Under Pixel Coefficients :
9. Select the pixel coefficient set number from the Set Number drop down box.
You can save or load up to four different sets of pixel coefficients.
10. Click Save .
7.9 Using Calibration Macros
Recording a Camera Calibration Macro
You can record a camera calibration macro to record a sequence of calibration
actions. You can then reload the macro at a later time to repeat the sequence of
actions.
To record a macro: