Dalsa Piranha 2 Series, Руководство пользователя

Страница: 75 / 86

75 Piranha 2 User’s Manual
03-032-00493-14 Teledyne DALSA
Code Command Short
Form Parameters Description
sensor pixel cou nt.
20 reset_cam era rc Reset the entire cam era
(reboot).
21 reset_p ixel_coeffs
rpc
Reset the p ixel coefficients to 0.
22 restore_factory_settings
rfs
Restore the camera’s factory
settings. FPN and PRN U
coefficients reset to 0.
23 restore_u ser_settings
rus
Restore the cam era's last saved
u ser settings and FPN and
PRN U coefficients.
24 set_analog_offset sao t i Set the analog offset. The first
p aram eter is the tap selection 1
to 4, 0 for all tap s. The second
p aram eter controls the d igital
analog convertor (DAC), in a
range from 0 to 1023, that sets
analog offset. Offset increases
w ith higher valu es.
25 set_bau d _rate
sbr i
Set sp eed of serial
com m u nication p ort. Bau d
rates: 9600, 19200, 57600, and
115200. Defau lt bau d : 9600
26 set_cam era_id sci s [s] Set cam era ID. The first
p aram eter is a character A to
Z, or 0 to 9. The second
op tional p aram eter is the serial
nu m ber of the ad d ressed
cam era.
27 set_d ata_m od e sdm i Set the d ata m od e of cam era
ou tp u t to:
0: 8-bit, A/ B/ C/ D p orts, single
p rocessor
1: 10-bit, A/ B/ C and D/ E/ F
p orts, single p rocessor
2: 8-bit, A/ B and D/ E p orts,
d u al p rocessor
3: 10-bit, A/ B/ C and D/ E/ F
p orts, d u al p rocessor
28 set_d igital_offset sdo t i Su btracts the inp u t valu e from
the vid eo signal prior to the
PRN U correction . The first
p aram eter is the tap selection 1
to 4, 0 for all tap s. The second
p aram eter is the offset in a
range from 0 to 511. Use in
calibrated m od e only.
Parameters:
i
= integer
f
= float
t
= tap selector
s
= string
x1
= pixel start
number
x2
= pixel end number
[]=
optional
parameter
All manuals and user guides at all-guides.com