Dalsa Genie Nano Series Скачать руководство пользователя

Страница: 22 / 113

•

Connecting the Genie Nano Camera

Nano Series GigE Vision Camera

Preventing Operational Faults due to ESD

Nano camera installations which do not protect against ESD (electrostatic

discharge) may exhibit operational faults. Problems such as random packet loss,

random camera resets, and random loss of Ethernet connections, may all be

solved by proper ESD management.
The Nano camera when used with a simple power supply and Ethernet cable, is

not properly connected to earth ground and therefore is susceptible to ESD

caused problems. An Ethernet cable has no ground connection and a power

supply's 0 volt return line is not necessarily connected to earth ground.

Teledyne DALSA has performed ESD testing on Nano cameras using an 8 kilovolt ESD generator

without any indication of operational faults. The two following methods, either individually or

together will prevent ESD problems.

•

Method 1: Use a shielded/grounded power supply that connects ground to pin-10 of the I/O

connector. The Nano case is now properly connected to earth ground and can withstand ESD of

8 kilovolts, as tested by Teledyne DALSA.

•

Method 2: When using Power Over Ethernet (PoE), Teledyne DALSA strongly recommends using

a shielded Ethernet cable to provide a ground connection from the controlling computer/power

supply, to the Genie Nano. PoE requires a powered computer NIC, or a powered Ethernet

switch, or an Ethernet power injector.

•

Method 3: Mount the camera on a metallic platform with a good connection to earth ground.

Содержание Genie Nano Series


















































































































Результаты поиска

Содержание Genie Nano Series

Отзывы:

Похожие инструкции для Genie Nano Series

Бренды по названию

Популярные бренды

Dalsa Genie Nano Series, Руководство пользователя

Результаты поиска

Содержание Genie Nano Series

Отзывы:

Похожие инструкции для Genie Nano Series

Бренды по названию

Популярные бренды