Dalsa Genie Nano Series, Руководство пользователя

Страница: 37 / 113

Nano Series GigE Vision Camera Operational Reference
•
35
Sensor Control Feature Descriptions
The following table describes these features along with their view attribute and device framework version. For each feature the device version
may differ for each camera sensor available. Such differences are indicated for any applicable feature.
When a Device Version number is indicated, this represents the camera software functional group, not a firmware revision number. As Genie
Nano capabilities evolve the device version will increase, therefore identifying the supported function package. New features for a major
device version release will be indicated by green text for easy identification.
The first column indicates whether a feature applies to monochrome or color camera models via a symbol. No symbol indicates a common
feature. Additionally the description column will indicate which feature is a member of the DALSA Features Naming Convention (indicated by
DFNC), versus the GenICam Standard Features Naming Convention (SFNC tag is not shown).
B/W
Color
Display Name Feature & Values Description
Device Scan Type DeviceScanType Defines the scan type of the device’s sensor.
Genie Nano is an Areascan camera.
< RO, Beginner >
Areascan Areascan Device uses an Areascan sensor.
Sensor Color Type sensorColorType Defines the camera sensor color type.
< RO, DFNC, Beginner >
Monochrome Sensor Monochrome Sensor color type is monochrome.
Bayer Sensor CFA_Bayer Sensor color type is Bayer Color Filter Array (CFA).
Input Pixel Size pixelSizeInput Size of the image input pixels, in bits per pixel.
< RO, DFNC, Guru >
10 Bits/Pixel Bpp10 Sensor output data path is 10 bits per pixel.
12 Bits/Pixel Bpp12 Sensor output data path is 12 bits per pixel.
Sensor Width SensorWidth Defines the sensor width in active pixels.
< RO, Expert >
Sensor Height SensorHeight Defines the sensor height in active lines.
< RO, Expert >
Acquisition Frame Rate AcquisitionFrameRate Specifies the camera internal frame rate, in Hz.
Any user entered value is automatically adjusted to a valid camera value. Note that a
change in frame rate takes effect only when the acquisition is stopped and restarted.
< Beginner >
Exposure Mode ExposureMode Sets the operation mode for the camera’s exposure
(or electronic shutter).
< Beginner >
Timed Timed The exposure duration time is set using the Exposure Time feature and the exposure
starts with a FrameStart event.
Trigger Width TriggerWidth Uses the width of the trigger signal pulse to control the exposure duration. Use the
Trigger Activation feature to set the polarity of the trigger.
The Trigger Width setting is applicable with TriggerSelector = Framestart.