Dalsa Genie Color C640, Руководство пользователя

Страница: 79 / 133

Genie Color Series-GigE Vision Camera Operational Reference

77
HeartbeatTimeout (mS) RW Always EXP10: 3 500 min=500, max=65000, inc=1
MaximumPacketResend RW N.conn EXP10: 1 100 min=0, max=1000, inc=1
InterPacketTimeout RW N.conn EXP10: 6 10000 min=1000, max=655350, inc=1
ImageTimeout RW N.conn EXP10: 6 700000 min=10000, max=6000000,
inc=1
LUTData RW N.conn (type Buffer)
FlatFieldGainBuffer RW N.conn (type Buffer)
FlatFieldOffsetBuffer RW N.conn (type Buffer)
UserBuffer
(see Accessing the Genie User Buffer)
RW N.acq (memory of type Buffer
available to the user)
FlatFieldGainMin RO N.conn EXP10: 0 (see note
1) min=0, max=16777215, inc=1
FlatFieldGainMax RO N.conn EXP10: 0 (see note
1) min=0, max=16777215, inc=1
FlatFieldOffsetMin RO N.conn EXP10: 0 (see note
1) min=0, max=16777215, inc=1
FlatFieldOffsetMax RO N.conn EXP10: 0 (see note
1) min=0, max=16777215, inc=1
FlatFieldWidth RO N.conn EXP10: 0 (see note
1) min=0, max=16777215, inc=1
FlatFieldHeight RO N.conn EXP10: 0 (see note
1) min=0, max=16777215, inc=1
InputPinStatusInput_1 RO Invalid EXP10: 0 1 min=0, max=1, inc=1
InputPinStatusInput_2 RO Invalid EXP10: 0 1 min=0, max=1, inc=1
Note 1: not displayed in CamExpert; not saved in a camera configuration file (CCF)
Feature Type BOOL
Feature Name Access W-mode Type Value Notes
LUTEnable RW N.conn BOOL True/False
TriggerEnable RW N.acq BOOL True/False
TriggerSoftware RW Always BOOL True/False
AcquisitionArm WO N.acq BOOL True/False (see note 2)
FlatFieldEnable RW N.conn BOOL True/False
FlatFieldCalibrationEnable RW N.conn BOOL True/False (see note 3)
TimestampReset WO Always BOOL True/False
SaveCameraConfiguration WO N.conn BOOL True/False
LoadCameraConfiguration WO N.conn BOOL True/False
Note 2: Prepares the Genie for an optimal acquisition start with minimal delay. This feature should be set true only
after all other features are set else the effect of AcquisitionArm is canceled.
Note 3: FlatFieldCalibrationEnable is set True before a calibration sequence is performed. When calibration is
enabled features such as Crop, Flip, LUT, etc. are reset to their default state before the calibration sequence is
started. The application would need to restore these features after flat field calibration is complete.