Dalsa Calibir 640 AB Скачать руководство пользователя страница 98

Страница: 98 / 105

•

Troubleshooting

Calibir 640 GigE IR Camera User's Manual

Device Not Available

Device IP Error

Device Available

GigE Server
Tray Icon:

Note: It will

take a few

seconds for the

GigE Server to

refresh its state

after any

change.

A red X will remain over the

GigE server tray icon when

the Calibir device is not found.

This indicates a network issue

where there is no

communication with Calibir.

Or in the simplest case, the

Calibir is not connected.

The GigE server tray icon

shows a warning when a device

is connected but there is some

type of IP error.

The GigE server tray icon when

the Calibir device is found. The

Calibir has obtained an IP

address and there are no

network issues. Optimization

may still be required to

maximize performance.

Problem Type Summary

Calibir problems are either installation types where the Calibir is not found on the network or setup

errors where the Calibir device is found but not controllable. Additionally a Calibir may be properly

installed but network optimization is required for maximum performance. The following links jump

to various topics in this troubleshooting section.

Device Not Available

A red X over the GigE server tay icon indicates that the Calibir device is not found. This indicates

either a major camera fault or condition such as disconnected power, or a network issue where

there is no communication.

•

Refer to the Quick Start Guide and Camera Connection Setup sections to verify required

installation steps.

•

Refer to the Teledyne DALSA Network Imaging manual to review networking details.

•

In multiple NIC systems where the NIC for the Calibir is using LLA mode, ensure that no

other NIC is in or switches to LLA mode. It is preferable that the Teledyne DALSA DHCP

server is enabled on the NIC used with the Calibir instead of using LLA mode, which

prevents errors associated with multiple NIC ports.

•

Verify that your NIC is running the latest driver available from the manufacturer.

Device IP Error

The GigE server tray icon shows a warning with IP errors. Review the following topics on network IP

problems to identify and correct the condition.
Please refer to the Teledyne DALSA Network Imaging Package manual for information on the

Teledyne DALSA Network Configuration tool and network optimization foe GigE Vision cameras and

devices.

Multiple Camera Issues

•

When using multiple cameras with a computer with multiple NIC ports, confirm each Calibir

has been assigned an IP address by checking the GigE server.

•

To reduce network traffic in configured problem free systems, use the Network Configuration

tool to stop camera discovery broadcasts. Refer to the Teledyne DALSA Network Imaging

manual.

Содержание Calibir 640 AB










































































































Результаты поиска

Содержание Calibir 640 AB

Отзывы:

Похожие инструкции для Calibir 640 AB

Бренды по названию

Популярные бренды

Dalsa Calibir 640 AB, Руководство пользователя

Результаты поиска

Содержание Calibir 640 AB

Отзывы:

Похожие инструкции для Calibir 640 AB

Бренды по названию

Популярные бренды