Dalsa Calibir 640 AB Скачать руководство пользователя страница 38

Страница: 38 / 105

•

Features and Configuration Options

Calibir 640 GigE IR Camera User's Manual

Adaptive Contrast Enhancement

The native output of the Calibir sensor is 14-bits. Adaptive contrast enhancement (range

compression) is implemented when the pixel output is 8-bits. Adaptive contrast enhancement

automatically adjusts the range in the 14-bit image to map to 8-bits to output high quality, well-

contrasted images, regardless of the temperature differences found in the scene.

Note: For analog output, the camera output pixel format is always 8-bit, therefore

adaptive contrast enhancement is always implemented; for the GigE Vision digital output,

the camera output pixel format can be set to either 14 or 8-bits (14-bit output is

calibrated but does not use range compression).

The 14-bit image is analyzed to determine the average pixel value. Using this average value, the

Range Compression Contrast setting determines the number of standard deviations around this

average value that are mapped to 8-bit values. Lower values provide less contrast (less stretching

of values) while higher values stretch a smaller range in the original 14-bit image. Recommended

values for most applications is between 100 and 150. When contrast is set to the maximum value

(255), the image is effectively binarized (pixels above the average value in the 14-bit image set to

255 and those below the average value set to 0).
When Range Compression Contrast Limit Mode is enabled, it limits the action of the contrast

compression to a certain amount. The higher this value (between 0-255) the less contrast the

scene reaches for a given temperature difference. This is useful for very low contrast scenes where

the range of values in the 14-bit image is very small and the contrast stretching would otherwise

introduce noise and other image artifacts due to the small amount of data present. Recommended

value for most applications is between 60 and 100.

Range Compression Constrast

(higher values tighten this range from

the average pixel value)

Range Compression Constrast Limit Value

(higher values widen this limit)

All lesser values mapped to

0 (black) in 8-bit output

All greater values mapped to

255 (white) in 8-bit output

Figure 16: Range Compression Contrast

Содержание Calibir 640 AB










































































































Результаты поиска

Содержание Calibir 640 AB

Отзывы:

Похожие инструкции для Calibir 640 AB

Бренды по названию

Популярные бренды

Dalsa Calibir 640 AB, Руководство пользователя

Результаты поиска

Содержание Calibir 640 AB

Отзывы:

Похожие инструкции для Calibir 640 AB

Бренды по названию

Популярные бренды