DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
81
8 Network and PAS
8.1
Ethernet
The network settings of the device can be configured manually or automatically assigned
by a DHCP (Dynamic Host Configuration Protocol) server.
Note that...
... incorrect network settings (e.g. the allocation of an already used IP address) die may
result in malfunctions.
... the detected and available network speed is displayed in the Setup > System > Info >
Network dialogue.
... the bit rate off all IP cameras recordings is reduced when many IP cameras are used
with a too low network speed (e.g. 10 Mbps
... the default settings are used.
Use DHCP
inactiv
Allow IP-Finder configuration
activ
FQDN SSL-Certifikate
inactiv
IP Adress
192.168.2.230
Subnet mask
255.255.255.0
Data rate
Auto
Host name
system
Domain name
dallmeier.com
¾
Open the
Ethernet
/
Tokenring
dialog via
Setup
>
Network
>
Settings
>
Ethernet.
Fig. 8-1
¾
Note the following explanations.
¾
Activate the required options.
¾
Deactivate the not required options.
¾
Conduct the manual or DHCP configuration, as described in the following chapters.
¾
Confirm with
OK
.