DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
51
¾
In default configuration recording will always be done with the
Permanent
recording
mode and normal video quality.
¾
Ensure that the
Expert Mode
option is activated.
¾
Set the
Switching by timer
recording mode.
¾
Observe the explanations given below.
Fig. 6-25 :
Switching by timer
recording mode
¾
Configure
Private Zones
if required (see section Basic configuration).
¾
Activate the
Use Database
option if required (see above).
¾
Set the parameters for the
Motion
recording mode (
A
) as described above.
¾
Set the parameters for the
Contact
recording mode (
B
) as described above.
Proceed as follows in order to
configure the switching
:
¾
Open the camera timer dialog with a click on
Timer
.
The extended Camera timer for camera x dialog will be displayed. The definition of periods
and exceptions is done as with the normal camera timer (see section
Camera
timer
).
¾
Ensure that the
Standard
option is selected.
¾
Activate the setting of the relevant recording mode (
A
).
Fig. 6-26 : Extended
camera timer
