dallmeier CaminPIX DDF4010HDV-IM, Руководство пользователя

Страница: 24 / 76

DDF4010HDV
www.dallmeier.com 24

Insert the plug-in module carefully into the housing base until it clicks into place.
The number of the spring clips must match the number of the slots.

Secure the plug-in module.
For this purpose tighten the 2 securing screws of both spring clips (Fig. 5-7).
Housing base
Slot for spring clip 1
Securing screw
(spring clip 2)
Plug-in module
Spring clip 2
Securing screw
(spring clip 2)
Slot for spring clip 2
Fig. 6-7

Connect the power supply unit to the mains socket.

Connect a CVBS monitor to the video preview output (Fig. 5-7).

Adjust the lens using the 3-axis mount and set the focal length with the TELE / WIDE
buttons (Fig. 5-8).
The “Little Man” symbol on the lens side indicates the sensor direction.

Disconnect the CVBS monitor.

Attach the housing to the housing base and tighten the 3 housing screws using a T20
torx wrench.