DDF4010HDV
www.dallmeier.com
22
Locked ceiling clamp
Locked ceiling clamp
Suspended ceiling
Fig. 6-4
Step 4
Connect the power supply unit to the mains socket.
Connect a CVBS monitor to the video preview output (Fig. 5-3).
Adjust the lens using the 3-axis mount and set the focal length with the TELE / WIDE
The “Little Man” symbol on the lens side indicates the sensor direction.
Disconnect the CVBS monitor.
Attach the trim ring to the housing and tighten the 3 housing screws using a T20 torx
wrench.
Suspended ceiling
Locked ceiling clamp
Locked ceiling clamp
Trim ring with bubble
Housing screw
(T20 Torx)
Fig. 6-5