dallmeier CaminPIX DDF4010HDV-IM, Руководство пользователя

Страница: 20 / 76

DDF4010HDV
www.dallmeier.com 20
Step 1

Cut a circular recess (Ø 169 mm) in the suspended ceiling using a drywall utility saw or
a jigsaw.

Screw the M6 screw eye bolt on the bottom side of the housing.

Unscrew the 3 housing screws using a T20 torx wrench and remove the trim ring.
Suspended ceiling
Ø 169 mm
M6 screw eye bolt
Ceiling clamp
Ceiling clamp
Trim ring with bubble
Housing screw
(T20 Torx)
Fig. 6-1
Step 2 (Fig. 6-2)

Screw a ceiling hook on the supporting structure.

Insert the housing into the circular recess.

Attach the safety wire to the M6 screw eye bolt (use a carabiner) and the ceiling hook.

Connect the required cables suspended from the ceiling to the connectors of the termi-
nal area (see chapter “ Pin Assignment ” on page 69).