Dali PHANTOM CI AMP-2500 DSP, Руководство по установке и Руководство пользователя

Страница: 27 / 29

8.8 Zone Setup & Routing
Open the configuration Dashboard and select the [Zone]
Tab . The [Zone] Tab is shown in Diagram 8C .
• Select the zone to be configured. The number of zones
available and their channel format (stereo or mono) will
depend on the amplifier input setup and output mode
(Lo-Z or Hi-Z). For example, a two output amplifier can
have the following zone configurations:
• 1 x stereo Lo-Z zone
• 2 x mono Lo-Z zones
• 1 x mono Hi-Z zone
• 1 x mono Lo-Z BTL zone
• Name zones by typing in the Zone Name field.
• Adjust the zone volume if required by using the slider.
• Define a mono or stereo zone by selecting the
appropriate option. Defining a stereo zone will reduce
the total number of further zones available.
• Specify an input for the zone by selecting from the
drop-down menu. Selecting a stereo input for a mono
zone will automatically sum the stereo channels to
mono.
NOTES
When configured in Lo-Z BTL mode or Hi-Z mode, the
AMP-2500 DSP amplifier operates in “bridged” mode
where the output of two channels is combined. This
means that the number of output channels available in
these modes is half that available in Lo-Z mode.
Mono signals might be mono at source, created though
combining the left and right channels of a stereo signal
(summed mono) or treating the left and right channels of
a stereo signal independently (split mono).
27