Dali PHANTOM CI AMP-2500 DSP, Руководство по установке и Руководство пользователя

Страница: 13 / 29

6.3 Speaker Connections
Speaker connections from the AMP-2500 DSP amplifier
are made via male “Euro Block” connectors. Ensure that
speaker connection polarity is correct throughout the
installation:
In the case of conventional Lo-Z speaker connections,
positive (+) amplifier terminals should always be
connected to positive speaker terminals and negative
(–) amplifier terminals always connected to negative
speaker terminals.
In the case of Hi-Z or BTL speaker
connections, the two speaker cable conductors
should be connected between the positive (+)
terminal of Output 1 and the negative terminal
(-) of Output 2.
NOTE:
Hi-Z and BTL speaker connection is not typically
relevant to home audio systems and requires specialist
knowledge. It should only be carried-out by appropriately
qualified audio technicians.
Output mode options (Lo-Z or Hi-Z) can be configured via
the AMP CONFIGURATOR
[Output] Tab . See Section 8
of this manual.
Connecting cables to the supplied female output
connector is illustrated in Diagram 6E .
13