62
Chapter
Ⅴ
IE Monitor
Section 1
Introduction
The DVR can be visited and controlled by IE browser. IE provides the functions, such as remote monitor,
local record, PTZ control, Remote control, etc.
Section 2
Installation Requirements
Requirements for the PC hardware for monitoring, through IE access under the normal condition:
CPU: Interl pentium4 2.0GHz and higher
Ram: DDR 512MB and higher
Video card: independent video card with 64M video memory and higher
Network card: 100M
IE version: support IE6.0 and higher
Support system: support windowsXP, windows2000 and higher
Install DirectX9.0 or higher version, adjust hardware acceleration to highest.
Section 3
Network Connection Operation
1. Insure DVR connect the network correctly
2. Using ping ***
.
***
.
***
.
***(DVR IP), check if the network connect correctly.
3. Make sure Web-client net normally used, the user has to insure http port communicate normally.
4. Install the “DVR_WEB_X.XX.XX.msi” in CD. (X.XX.XX is version number)
5. Input http:// and host IP address and http port in IE address bar. For example: if host IP address is
“10.0.0.124” and http port is 998 then input http://10.0.0.124:998 in IE address bar.
Note: If you have not installed “DVR_WEB_X.XX.XX.msi” to your PC which burned in CD, there will be a
attention for installing ActiveX plug-in software in IE when remote access DVR, install it.
