58
Fig. 57
Choose “Preset” to setup or call the corresponding preset.
“001” is an order of preset positions and click “Set” to set a preset position, click “Call” to move PTZ to a preset
position;
¾
Cruise Setup
Choose “Cruise”, and get into the interface as follows:
Fig. 58 Fig. 59
Line: Select the line of the cruise.
Setup: Get into the interface as like Fig 59 to set line.
Stop Time: The time which the camera stops in the cruise dot.
¾
AUX setup
Choose “AUX” to control lighting and screen wiper.
PTZ can be controlled on DVR_WEB or Netclient. The detail refer to Chapter 5
For type
Ⅰ
16 channel model (page.6), PTZ control interface can be shown by press “Fn” on front panel.
Section 14 Restore Defaults Setting
Enter “Main Menu
－
Advanced
－
Maintenance
－
Reset” as shown in Fig. 60.
