34
（
red
）
External and alarm
Connected in web
Screen Switch
Type
Ⅰ
4 channel model, type
Ⅱ
4 channel model and type
Ⅲ
model (with LCD)
(page.6):
Under the surveillance mode, system defaults 4-screen, press
to have the first split screen full screen, press
to have the second split screen full screen, press
to have the third split screen full screen, press
to have the forth split screen full screen. When the first split screen is the full screen, press
to return
to 4-screen, so do the other 3 buttons.
Type
Ⅱ
8 channel model (page.6):
Under the surveillance mode, system defaults 9-screen, press
, display the first channel in full screen mode,
press again
, display the second channel in full screen mode. Press again
, display 1-4 channels, press
again
, display 5-8channel, press again
, display 9-screen. Press again
, display the first channel in full
screen mode. So as to analogize the other three buttons.
Note: under non 9-screen mode, press “ESC” system will return to 9-screen display.
Type
Ⅲ
model (without LCD) (page.6):
Press “
” key to switch split screen and single screen mode.
Type
Ⅰ
16 channel model (page.6):
Press “
” key to switch split screen and single screen mode.
Screen Circular Monitor
Type
Ⅰ
4 channel model, type
Ⅱ
model and type
Ⅲ
model (page.6):
Enter “Main Menu
→
Advanced
→
General”, select circular monitor “ON”, set circular monitor interval
(interval of circle monitor), press “OK”, the system will start circular monitor. Default system configuration:
OFF.
“Auto Switch” will show on status bar when auto circular is activated.
