50
be identical. Use the Gateway address first.)
¾
ETH mode:
Could choose “Adaptive”, “Half Duplex 10M”, “Full Duplex 10M”, “Half Duplex 100M” and
“Full Duplex 100M”. Default is “Adaptive”.
¾
DNS:
Please set DNS as local network supplier's IP when DVR is accessed from WAN.
¾
Server Port and Server IP:
If you set this IP and port, when there is alarm and exception happened, DVR
will send information to that host IP.
¾
Video Port:
Example
9998.
¾
PLATFORM:
Setting IP address and port of DVR and connect it with internet. Enter 'Platform' to setup the IP
address of P2P service provider (Default server IP: 60.191.28.165) and enable this function. Access this server
through IE and add the DVR which is going to be operated. The others can be done in the same manner.
PPPoE
Set DNS as local network supplier's IP in “Network Setup” interface. Then select “PPPoE” as shown in Fig.43.
Fig.43
Please set Mode as “PPPoE”, then input the Username and Password provided by ISP. System will use PPPoE
protocol to connect the net with an auto-obtain dynamic IP address.
DDNS setup
Set DNS as local network supplier's IP in “Network Setup” interface. Then select “DDNS” as shown in Fig.44.
