DALBO POWERCHAIN 800 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 55

DALBO POWERCHAIN 800 Скачать руководство пользователя страница 26

POWERCHAIN

Page 26

Driving and operation

Proper operation is important in order to get optimal performance from your

disc harrow. This applies to both work in the field and in terms of safety. It is

therefore crucial that you have thoroughly read the safety precautions that

cover the machine.

Unfolding and folding

Unfolding and folding are conducted with the tractor parked

Unfolding

Fig. 11

1

The machine is fully lifted onto

the wheel frame (A) via the

hydraulics (marked: Yellow).

Fig. 12

2

The cylinders for unfolding and

folding (marked: Red) are

activated and the side sections

are completely folded. Then

the float position is activated

for “red” outlet.

Fig. 13

3

The disc chains will now hang

loosely in the downward arcs,

and must be tightened before

starting work.

Fig. 14

4

With the tap open on the

single-acting hose (marked:

White), now raise the pressure

to 180 Bar on the manometer,

then close the tap. Then

tighten up the chains and the

disc harrow is ready for use.

180 Bar

A

«
...
24
25
26
27
28
...
»

Содержание POWERCHAIN 800
























































Отзывы:

Нет отзывов