DALBO AXR-H Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 50

background image

AXR-H

Page 40



After mounting the cylinder, carefully raise and lower the side wings several times
to bleed air out of the hydraulic system. Lift the side wings only approximately 20
to 25 degrees from the working area so that the side wings can be lowered to the
same side from which they were lifted.



Never allow bystanders within the operating radius of the AXR-H while the hydraulic
units are in operation. This area is considered to be fatally dangerous.

Replacing Wheel Frame Cylinder

The AXR-H must first be unfolded and lowered so that the discs are resting securely
on the ground. Relieve the pressure in the wheel cylinder so that the wheels are
resting on the ground.

1.

Dismount the hoses. (To avoid ground pollution, it is recommended that you
collect the oil in a tray placed underneath the working area while carrying out
repairs on the implement.)

2.

Remove the split cotter pin and the pin. The cylinder is now free.

3.

Mount the cylinder in reverse order. Remember to make sure that the pin is en-
gaged in the stop and that the pin is secured with a split cotter pin.



After mounting the cylinder, carefully raise and lower the AXR-H several times to
bleed air out of the system. Initially, the AXR-H must not be lifted higher than 10-20
cm from the ground. Never allow bystanders within the operating radius of the AXR-
H.

Changing the seals on the wheel frame cylinder

Fig. 35

Cylinder 80/50-350

1.

Empty the oil from the cylinder by moving the cylinder back and forth.

2.

Move the piston to the middle position. Unscrew the gland (pos. 10) from the
cylinder casing (pos. 5). A special tool is needed to remove the gland. If the
gland is stuck, it may help to warm up the very front of the socket. When the
gland has been unscrewed, pull the piston out towards the gland. Pull the pis-
ton rod (pos. 7) out of the cylinder casing (pos. 5).

3.

Remove the locking nut (pos. 1) which holds the sleeve (pos. 2).

4.

Pull the sleeve (pos. 2) off the piston rod (pos. 7).

5.

Pull the gland (pos. 10) off the piston rod (pos. 7).

«
...
38
39
40
41
42
...
»

Содержание AXR-H



















































Отзывы:

Нет отзывов

Похожие инструкции для AXR-H

Бренд: Eclipse Combustion Страницы: 46

Бренд: Bard Страницы: 2

Бренд: ParaBody Страницы: 6

Бренд: Sailmon Страницы: 10

Бренд: B&W Tek Страницы: 12

Бренд: b&o Страницы: 46

Бренд: TC Electronic Страницы: 2

Бренд: Bahco Страницы: 131

Бренд: Bahco Страницы: 126

Бренд: Bard Страницы: 36

Бренд: Bard Страницы: 2

Бренд: Bard Страницы: 30

Бренд: Bard Peripheral Vascular Страницы: 44

Бренд: Cannon Страницы: 40

Бренд: NARGESA Страницы: 34

Бренд: Danfoss Страницы: 106

Бренд: Ecler Страницы: 108

Бренд: R&S Страницы: 121

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды