DALBO AXR-H Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 50

background image

AXR-H

Page 39

Fig. 34

Cylinder 70/30-205

1.

Empty the oil from the cylinder by moving the cylinder back and forth.

2.

Move the piston to the middle position. Unscrew the gland (pos. 11) approxi-
mately 25 mm out. (A special tool is needed to remove the gland). If the gland
is stuck, it may help to warm up the very front of the socket. When the gland
has been unscrewed, pull out the piston towards the gland. Pull the piston rod
(pos. 6) completely out of the cylinder casing (pos. 5).

3.

Remove the self-locking nut from the bottom of the piston rod.

4.

Pull the sleeve off the piston rod (pos. 4).

5.

Pull the gland off the piston rod (pos. 11).

6.

Remove the seals from the gland and the sleeve (pos. 1+2+3+7+8+9+10+12).

7.

Clean all parts thoroughly. Check for filings, shavings, burrs and make sure
that there is no rust around the scraper ring (pos. 12) in the gland. If this is the
case, it must be removed.

Assembly
1.

Assemble the new seals into the gland and the sleeve.

2.

Lubricate the screw threads on the gland (pos. 11) and the cylinder casing
with grease or a corrosion-inhibiting, anti-seize lubricant.

3.

Mount the gland (pos. 11) onto the piston rod.

4.

Mount the sleeve (pos. 4) and screw on the self-locking nut with Loctite. Make
sure that the screw threads are completely clean and free from oil or other im-
purities before using Loctite. Do not refill the oil for the first 12 hours after the
application of Loctite.

5.

Lubricate the sleeve (pos. 4) and the inside of the cylinder casing, then guide
the piston rod into the middle position of the casing.

6.

Screw on the gland and tighten.

7.

Mount the cylinder. Remember to make sure that the pin is engaged in the stop
and that the pin is secured with a split cotter pin.

8.

Attach the hoses. Make sure that the hoses are not caught or squeezed in any
way and that the connections are airtight.



Watch for places where the hoses could possibly be ripped off or become
squeezed or caught in the equipment.

«
...
37
38
39
40
41
...
»

Содержание AXR-H



















































Отзывы:

Нет отзывов

Похожие инструкции для AXR-H

Бренд: ZOLL Страницы: 5

Бренд: Accu-Chek Страницы: 3

Бренд: iBin Страницы: 2

Бренд: Raytheon Страницы: 68

Бренд: KegLand Страницы: 23

Бренд: Uchida Yoko Страницы: 40

Бренд: Saadat Страницы: 61

Бренд: Saadat Страницы: 22

Бренд: Teac Страницы: 9

Бренд: Tascam Страницы: 3

Бренд: Tascam Страницы: 56

Portastudio 2488

Бренд: Tascam Страницы: 28

Бренд: Tascam Страницы: 2

Бренд: Tascam Страницы: 5

Бренд: Tascam Страницы: 3

Бренд: Tascam Страницы: 2

Бренд: Tascam Страницы: 107

Бренд: Tascam Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды