Daktronics VANGUARD VC6, Руководство пользователя

Страница: 6 / 27

Installation Preparation
2
2 Installation Preparation
This section explains what to consider before installing a Daktronics Vanguard
®
VC6
display.
Follow all guidelines and safety precautions in this manual when installing the display. Do
not modify the display or control system in any manner without the written permission of
Daktronics’ engineering staff.
Any unauthorized modifications will nullify the display warranty.
Pre-Installation Checklist
• The display is in good condition after shipping and uncrating.
• A straight and square mounting frame is provided for the display.
• The support structure can carry the weight of the display and meets local and
national codes.
• Ensure proper power is available at sign structure.
• Ensure the display cabinet has no holes (accidental or intentional) that will allow
water to enter the display.
• All display modules are fully latched into the display cabinet.
Structure Requirements
Support structure design depends on mounting method, installation height, display size,
and weight. Because every installation site is unique, Daktronics approves no single
procedure for mounting displays.
Things to consider prior to installation:
• The display mounting requires a continuous horizontal stringer across the back
attached to all display mounting points to provide adequate wind load support
for the cabinet.
• The structure can carry the weight of the display and wind load.
•
Display structure and mounting must not obstruct air flow.
• Light sensor must not be obstructed for the display to function properly.
Daktronics is not responsible for the installations or the structural integrity of support
structures done by others.