Daktronics VANGUARD VC6, Руководство пользователя

Страница: 11 / 27

Section Splicing
7
5. Starting at one end of the display, use the splice tool to draw the top section into the
bottom until the splice key is fully engaged, as shown in Figure 5 .
6. Ensure display sections are aligned and that LEDs are also in alignment.
7. Attach the splice plates and splice T-clips along the section splice, as shown in
Figure 6 . Use an
11
/
16
" impact wrench or ratchet to tighten all nuts on the splice plates
and splice T-clips.
Top
Section
Bottom
Section
Figure 5: Aligning Display Sections with Splice Tool
Splice
Plate
Bolt
Nut
Washer
Display Face
Bottom
Section
Top
Section
Figure 6: Installed Flat Splice Plate