Daktronics SW-2001, Руководство пользователя

Страница: 9 / 88

Mechanical Installation
5
Wall Mounting Digit Modules
Due to the variety of wall materials used in sports facilities, Daktronics cannot anticipate
a user’s individual installation needs or provide mounting hardware suitable for every
installation. Choose a method of installation that will safely support the weight of the
display.
Before installing any wall anchors or the mounting structure, determine where all of the
mounting holes will be located on the display modules. Holes provided on the modules
should be convenient for most installations.
For mounting locations, weights, and hardware suggestions, refer to the model-specific
mechanical specification drawings listed in Appendix A .
SW-3104
Reference Drawings:
SW-3104 Floor Stand Assy ................................................................................... DWG-253540
The SW-2104 features carrying handles and may not need to be wall mounted. However,
it may be mounted to a floor stand for greater stability. Refer to DWG-253540 .
Vertical Wall Mounting (Indoor or Outdoor)
Reference Drawings:
Vertical Wall Mount ............................................................................................ DWG-130545
Use this method when the overall display has modules mounted on top of one another.
1� Before attaching the digit module to the wall, attach the caption module to the digit
module as described in Installing Caption Modules (p�4) .
Note: Extra strut length is not required when caption modules are mounted at either
the top or bottom of the column.
2� Attach vertical mounting struts to the wall. Strut length will vary depending on the
total number of display modules. Center-to-center distance between vertical struts is
8'-10.5" (2705 mm) for 9' (2743 mm) wide modules.
3� Use 3/8" bolts to attach the modules to spring nuts in the struts ( Figure 4 ). Mount the
lowest module first, and then add modules working upward.
Figure 4: Spring Nut in Strut