Daktronics Galaxy AF-3200 Series, Руководство пользователя

Страница: 35 / 79

•
Check light detector for obstructions.
•
Replace the light detector.
•
Replace the controller.
4.16 Initial Operation Information
Every time the display is operated, the display will run through an initialization in
which it will display the following:
1. Product Name (Galaxy®)
2. Display Size (Row x Column)
3. Shading (64 Mono)
4. Bootloader Version (OS X.XX)
5. Firmware Number (ED13305)
6. Firmware Revision (Rev X.XX)
7. Hardware Address (HW:XX)
8. Software Address (SW:XX)
9. IP Address: ((default) 172.16.192.25)
10. Subnet Msk: ((default) Msk: 255.255.0.0)
11. COM1 Configuration (C1:V15) ((Modem C1:V15) If a Modem is present)
12. COM 2 Configuration (C2:RTD)
13. Socket 3001: (IP 3001: V15)
14. Socket 3002: (IP 3002: RTD)
15. Line Frequency (CLK: AUTO 60 Hz)
16. Display Name Description (Galaxy Row x Column)
Maintenance and Troubleshooting
4-11
After this sequence is complete, the display will blank. A single pixel will flash in
the lower right hand corner of the display to show that the display has power, but no
messages are currently running.
4.17 Replacement Parts List
The following table contains some of the items in this sign that you may need to
replace over time. Many of the parts within the sign also list their part numbers on
labels affixed to them.
To prevent theft, Daktronics recommends purchasing a lockable cabinet to store
manuals and replacement/spare parts.
Part Description Part Number
Controller 0A-1229-0013
Light Detector 0P-1151-0002
Digital Temp Sensor 0P-1247-0008
Cable; 20 position, 18”, dual row W-1387
Ribbon Assy, 20 Position, 60" 0A-1000-0021
Cable; 20 position, 84”, dual row 0A-1000-0023
Cable Assy, 6-pin to 6-pin harness 0A-1261-0001
20ft, RJ45; 4-pair Twisted W-1406
30ft, RJ45; 4-pair Twisted W-1446
50ft, RJ45; 4-pair Twisted W-1464
Quick Connect Interface, Input 0P-1229-2004
Quick Connect Interface, Output 0P-1229-2002
Sign is stuck on bright or dim