Daktronics Galaxy AF-3200 Series, Руководство пользователя

Страница: 24 / 79

Electrical Installation
3-8
3.8 First Time Operation
Each time the display is powered up; the display will run through an initialization in
which it will display the following:
1. Product Name (Galaxy®)
2. Display Size (Row x Column)
3. Shading (64 Mono)
4. Bootloader Version (OS X.XX)
5. Firmware Number (ED13305)
6. Firmware Revision (Rev X.XX)
7. Hardware Address (HW:XX)
8. Software Address (SW:XX)
9. IP Address: ((default) 172.16.192.25)
10. Subnet Msk: ((default) Msk: 255.255.0.0)
11. COM1 Configuration (C1:V15) ((Modem C1:V15) If a Modem is present)
12. COM 2 Configuration (C2:RTD)
13. Socket 3001: (IP 3001: V15)
14. Socket 3002: (IP 3002: RTD)
15. Line Frequency (CLK: AUTO 60 Hz)
16. Display Name Description (Galaxy Row x Column)
After this sequence is complete, the display will blank. A single pixel will flash in
the lower right hand corner of the display to show that the display has power, but no
messages are currently running.