background image

Drv. Win. Up/Down

Pass. Win Up/Down

Pass. Door Latch

Trunk Latch

Trunk Raise/Lower

Drv. Door Latch

Activate Auxiliary Output

1

2

3

4

5

 

 
OPERATION FOR MODE 1, DIP switch #1 OFF 

 

The key chain transmitter has five buttons.  They are referred to below as button 1, 2, 3, 

4, and 5.  Buttons 1 and 2 are on the top, to the right and left of the green light.  Buttons 3, 4, 
and 5 are below them with button 5 in the bottom center. 

Button 1 controls the driver’s window.  The first time it is pressed it will roll the window 

down until the button is released.  The next time it is pressed it will roll the driver’s window up 
until it is released.  Button 2 controls the passenger’s window.  It works the same as button 1, 
reversing the window direction each time it is pressed.   

Button 3 releases the driver’s door latch.  It will send 12 volts to the actuator for about 

one second.  The relay is turned off automatically to prevent burning out the latch release 
actuator.  Button 4 releases the passenger’s door latch.  It will send 12 volts for approximately 
one second.   

Button 5 Trunk latch application:  Pressing button 5 will activate the third internal relay 

for about one second.  The white w/blue and white w/red wires should not be used.   

Button 5 Trunk lift, lock/unlock, or similar:  The first time the button is pressed it will 

raise the trunk (or unlock doors) until it is released.  The next time it is pressed it will lower the 
trunk, (or lock doors) until it is released.  The purple wire should not be used. 

Button 1 and 3 pressed at the same time will activate an extra relay which can be used 

to operate almost any accessory.  When DIP switch #2 is off, the relay will remain on as long 
as the buttons are held.  When the buttons are released it will turn off.  When DIP switch #2 is 
on, the relay will turn on and remain on the first time the buttons are pressed.  The next time 
the buttons are pressed the relay will turn off. 

When the ignition key is on, the only buttons that will work are 1 and 2.  Buttons 3, 4, 5, 

and 1-3 are disabled.  This safety feature will not allow the doors or trunk to accidentally 
release while the vehicle is in motion.  This disables the key chain transmitter only.  The 
emergency release switch will not be disabled. 

 

 

 

Содержание CMD-9000













Отзывы: