Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
6
REV012019
•
Do not operation machine without safety guards or with the electrical panel cover
removed.
•
Always disconnect the machine from the power socket before changing the disk or
carrying out any maintenance job, even in the case of abnormal machine operation.
•
Do not operate this machine without the handle and/or handle switch disconnected.
•
Always wear OSHA approved safety glasses when operating this machine.
•
Never put your hands or arms into the cutting area while the machine is operating.
•
Do not shift or move machine while the machine is in operation.
•
Do not wear loose clothing with sleeves that are too long, gloves, bracelets, rings,
watches, chains, or any other object that could get caught in the machine during
operation; tie back long hair.
•
Keep the machine bed free from tools or any object, while the machine is in operation.
Locations of shields:
•
Metal shield screwed onto the disk head. (REF. A)
•
Self-regulating mobile blue plastic shield fitted coaxially with the fixed shield. (REF. B)
•
Black plastic cover, covering the electrical supply box.
*
picture may vary by model*
Electrical Equipment:
According to European Standard “CENELEC EN 60 204-1” which simulates modification,
publication (IED 204-1)
•
The electrical equipment ensures protection against electric shock as result of direct or
indirect contact. The active parts of this equipment are housed in a box so that access is
limited. The screws can only be removed with a standard screwdriver.
•
This equipment is protected against splashes of water and dust.
•
This machine has been tested in conformity with EN 60204.
