Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
12
REV012019
MAINTENANCE
DAILY MAINTENANCE
•
Check/fill coolant.
•
Check blade wear.
•
Check functionality of safety shields.
•
Make sure emergency stops are working properly.
•
General cleaning and removal of accumulated material.
•
Move head to the full upright position when not in use, helps avoid stress on the return
spring.
WEEKLY MAINTENANCE
•
Sharpen blade.
•
Clean blade housing.
•
Make sure the gearbox is full of oil.
•
Check power chord for any damage.
•
Clean and grease the screw and sliding guide vice.
MONTHLY MAINTENANCE
•
Check tightness of the screws on the motor, pump, jaws, and safety guard.
•
Check safety shields are not broken.
•
Grease the head hinge pin.
SIX MONTH MAINTENANCE
•
Change gear box oil.
•
Flush coolant tank. This can be done by removing the tank cover on the back of the tank.
And remove the filter screen on the deck of the saw.
•
Check all electrical components and connections in the electrical box. Saw vibration may
have loosened items wires or connections.
•
Change the gearbox fluid. Drain all oil out and wipe down box and all gears before
refilling. Use 90 weight synthetic gear oil.
