Daitsu FMCD*ECM series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 62

Page 23 of 62
SK2014 ‐ SON ‐ 002 ‐ TechMnl ‐ FMCD ‐ 003
SW2 System setting
0 2 ‐ pipes system
1 4 ‐ pipes system
SW4 Preheat setting
1 28°C
0 36°C
4. Motorized Fan Speed Settings for Different Models:
Unit Model
Speed (RPM)
S3 SW5 SW6
Low Medium High
FMCD ‐ 04 500 600 700 0 0 0
FMCD ‐ 06 600 700 930 0 1 0
FMCD ‐ 12 600 700 930 0 0 1
FMCD ‐ 15 700 800 1150 0 1 1
FMCD ‐ 18 900 1100 1300 1 0 0
FMCD ‐ 20 800 900 1100 1 1 0
FMCD ‐ 24 900 1200 1350 1 0 1
Default RPM 700 800 1100 1 1 1
5. Mode configuration:
DIPA ‐ S1 Model
SW7 SW8 Model setting
0 0 Cool ‐ Heat
0 1 Cool ‐ Heat + booster heater
1 0 Cooling only
1 1 Cool + primary heater
6. Unit ON/OFF
There are 3 ways to turn the system on or off:
a) By the ON/OFF button on the handset or wired wall pad.
b) By the programmable timer on the handset or wired wall pad.
c) By the manual control button on the air conditioner.
7. Auto ‐ Restart
The system uses a non ‐ volatile memory to save the present operation parameters when system is turned off or in
case of system failure or cessation of power supply.
The restored parameter data ‐ set depends on the type of user interface.
a) Handset only user interface:
When the power on signal is received by the air conditioner and no wired wall ‐ pad is installed, the Mode,
Fan Speed, Set temperature and Louver/Swing setting will be the same as the handset setting before the
last power off.
b) Wall ‐ pad only OR wall ‐ pad and handset user interface:
When the power on signal is received by the air conditioner and a wired wall ‐ pad is installed, the Mode, Fan
Speed, Set temperature, Louver/Swing setting and Timer ON/OFF weekly program will be the same as the
wall pad setting before the last power off.